[rishabhgupta]

Hi. I have been trying to implement something that would be able to produce an alert sound whatever the current profile of the mobile may be.But no success so far.Can anybody help me plz.

Rishabh

[kandyfloss]

Originally Posted by rishabhgupta

Hi. I have been trying to implement something that would be able to produce an alert sound whatever the current profile of the mobile may be.But no success so far.Can anybody help me plz.

Rishabh

Do you mean that when the user changes the profile the sound will be played?

There is generally a beep when the profile is changed.

[rishabhgupta]

No..... I want to play a beep sound at loud noise irrespective of the profile hes using at that time.
Rishabh

[shubhendra]

Hi Rishabh,
I think you want beep sound even if profile is set to "Silent" mode.

If thats the case,

Well i haven't tried what i am going to tell you but still you can try it (University exams going on thats why didn't try it)

Try to trigger an alarm because even on silent mode alarm generates sound.

For alarm and all try this link

Miso Alarm (PyS60 library)
http://www.hiit.fi/~hasu/misoalarm/

If this works do tell me else i will try afterwards.

[reallife47]

Originally Posted by shubhendra

Hi Rishabh,
I think you want beep sound even if profile is set to "Silent" mode.

If thats the case,

Well i haven't tried what i am going to tell you but still you can try it (University exams going on thats why didn't try it)

Try to trigger an alarm because even on silent mode alarm generates sound.

For alarm and all try this link

Miso Alarm (PyS60 library)
http://www.hiit.fi/~hasu/misoalarm/

If this works do tell me else i will try afterwards.

I am trying to implement the same thing.

The miso alarm is one that I do not want to use. Are there alternatives?

[croozeus]

Originally Posted by rishabhgupta

No..... I want to play a beep sound at loud noise irrespective of the profile hes using at that time.
Rishabh

Originally Posted by reallife47

I am trying to implement the same thing.

The miso alarm is one that I do not want to use. Are there alternatives?

Hi,

One thing that you could do is, Check the profile of the device using the xprofile of Cyke64, when you want to play the sound.

If the profile is silent, switch it to general, play the sound, and once that is over switch it back to the original profile.

However, if you are using a 2nd Edition FP2 device, you wont need to worry about all this as the sounds can be played during silent profile too using PyS60, as I just tested on my device

Hope that helps,

Best Regards,
Croozeus

[rishabhgupta]

Hey Shubhendra,
Thnx for the tip.Ya it worked but theres a slight problem.Its not loud as it should be.Its just low.Can u suggest any method to probably change the alarm tune or increase its volume.Thnx again for your help
Rishabh

[shubhendra]

Hi Rishabh,
I don't know think changing the alarm tone will help you, because the volume of alarm tone in silent mode must be fixed.

and sorry i don't know how to increase volume of alarm in this condition.

I suggest you it will be better to use Croozeus solution to this problem that is much more easy to implement.

Posted by croozeus:-

One thing that you could do is, Check the profile of the device using the xprofile of Cyke64, when you want to play the sound.

If the profile is silent, switch it to general, play the sound, and once that is over switch it back to the original profile.

However, if you are using a 2nd Edition FP2 device, you wont need to worry about all this as the sounds can be played during silent profile too using PyS60, as I just tested on my device

[rishabhgupta]

Ya but that too has limitations in the sense that it cant be used with Edition 2 phones. which is not the case with this solution.Are u aware of any modules that handle sound management.
Rishabh

[rishabhgupta]

Ya this thing works in the silent mode but the volume is very low.Can anybody suggest something about how to change the volume levels without changing the profile because I cant get the xprofile to work on my cell as it is a second edition.

Rishabh

[reallife47]

Is there a possiblity we could change the volume without changing the profiles?

[croozeus]

Originally Posted by reallife47

Is there a possiblity we could change the volume without changing the profiles?

Its not yet possible,

This is a thing that many people want.
Perhaps someone might want to work on an extension that allows this.

Refer to similar discussions below
http://discussion.forum.nokia.com/fo...ghlight=Volume
http://discussion.forum.nokia.com/fo...ghlight=Volume

Best Regards,
Croozeus