[elenabonetti]

Hi,
I want to send a 8BIT message that contains text and a link.
In order to make it, i send the parameters to one procedure, that one must

contains the user header in hex format.
I think that the udh is the result of the WBXML applied to the data to send.
Which Xml structure I must parser in Wbxml? like this?


<?xml version="1.0"?>
<!DOCTYPE CHARACTERISTIC-LIST SYSTEM "/DTD/characteristic_list.xml">
<CHARACTERISTIC-LIST>
<CHARACTERISTIC TYPE="ADDRESS">
<PARM NAME="BEARER" VALUE="GPRS?/>
<PARM NAME="PROXY" VALUE="123.123.123.123?/>
<PARM NAME="PORT" VALUE="9201?/>
<PARM NAME="GPRS_ACCESSPOINTNAME" VALUE=" mmsc.nokianokianok.com
"/>
<PARM NAME="PPP_AUTHTYPE" VALUE="PAP"
</CHARACTERISTIC>
<CHARACTERISTIC TYPE="MMSURL"VALUE=" http://mmsc.com "/>
<CHARACTERISTIC TYPE="NAME">
<PARM NAME="NAME" VALUE="MMS NOKIA GPRS"/>
</CHARACTERISTIC>
</CHARACTERISTIC-LIST>


I have look EXAMPLE OF A WAP OTA SERVICE SETTINGS MESSAGE Document but it use

Windows HyperTerminal.
I have also look the faq but the arguments regard hex code such as 060504157F0000
how can get it?

[paulbrow]

Hello - from your message I get the idea that what you want to send is a Service Indication Push message (SI). This is different than sending Wap Settings or MMSC Settings. Check out e.g. the spex available at http://www1.wapforum.org/tech/terms.asp?doc=WAP-167-ServiceInd-20010731-a.pdf

This will show that the XML structure of the SI is more like the following:

<?xml version="1.0"?>
<!DOCTYPE si PUBLIC "-//WAPFORUM//DTD SI 1.0//EN" "http://www.wapforum.org/DTD/si.dtd">
<si>
<indication href="http://mobile.club.nokia.com/"
si-id="12345678"
created="2003-03-11T13:48:27Z"
action="signal-high">
Check out the Club Nokia Site.
</indication>
</si>

Here is a WBXML version of the above SI, with necessary SMS headers added for sending to a number +XXXXX XXX XXXX. The message is sent to port 2948d, the port for PUSH messages.

0051000C91XXXXXXXXXXXX00F5A75F0605040B8400001B0601AE0205040045C60C036D6F62696C652E636C75622E6E6F6B6961008511033132333435363738000AC30720030311134827080103436865636B206F75742074686520436C7562204E6F6B696120536974652E000101

Broken down:
00-A7 -- see SmartMessaging FAQ on this site, question #8
5F -- length of userdata
0605040B840000 -- userdata header, destination port 2948 (0b84) -- see SmartMessaging FAQ

The rest is the WBXML version of the SI.
1B = random number between 00 and FF
06 = Push PDU
01 = length of headers
AE = application/vnd.wap.sic
02 = WML 1.2
05 = public ID: Service Indication 1.0
04 = charset iso-8859-1
00 = STRTABL length
45 = si w/content
C6 = indication w/content and attr
0C = href starting w/ http://
....

I sent this message to myself using AT commands:
at+cmgs=109
<<msg pasted here>>
Ctrl-Z

Worked beautifully.

-paul/ForumNokia

[elenabonetti]

THANKS but ... how can I obtain the wbxml code from my SI Xml?