[falconpl]

Here are my test results with the Anycom Blue PC-2000 PC Card (R1) (CC3010)
It's a PCMCIA bluetooth card which is H4 compatible and installs 4 serial ports in the system.

I have Windows XP and Nokia Developer's Suite for J2ME v2.1
Of course I remembered to properly configure the bt.esk files.

The series 60 MIDP SDK v1.2.1 does not work.
The Series 60 MIDP SDK 2.1 Beta didn't want to work with COM5 but when I changed it to COM2
and modified the bt.esk in a following way:

[hci]
hcidllfilename= hci_h4.dll
port= 1

it seemed to start working but I still have a problem:
I chose to run one of the BT example MIDlets: DiscoverConnect.jad

When I click Emulate, my real Nokia 7650 shows that there is a BT connection initiated.
On the PC I have a pop-up which says:

Bluetooth Serial Port Status:
COM2: Connecting to: xx:xx:xx:xx:xx:xx and server channel: 2

where xx is my card's MAC address.
But after a short while (a few seconds) the BT activity icon on N7650 goes away and on
the PC I can see:

Bluetooth Serial Port Status:
COM2: Disconnected. Unexpected termination.

So the connection surely is established but only for a few seconds.
Do you have any ideas what can be wrong?

[seppo_fn]

What is the application you are running on the Nokia 7650?

Please note that Nokia 7650 does not support JSR-82. Of course you can develop a C++ application for it. But you basically need to have an application listening for a connection if you intend to connect via RFCOMM or L2CAP.

Seppo
Forum Nokia