[fafou]

Hi,

We have a problem with this phone when using OPP profile.
If we try to send an image using with the phone to our bluetooth stack, we can see that the phone search for service BIP Responder (UUID 0x111B).
Since our application does not support BIP, the response is empty.
The phone then stops the search and displays an error!

If we retry, we can see sometime that the connection is successful. In the log, we see that in this case, the phone searched the OPP service!

Do you know why? Any clue? The same problem with 6680 phones...

Thank you.
Best regards,

Fafou

Here is the log, when it failed:

hci connected : handle 0x000B
max_slots_changed HCI event(handle 0x000b, slots : 5).
command complete event (max: 1, ogf: 0x02, ocf: 0x000d), OpCode = 080d
Deliver_HCI_ACL_Data_Packet (len=12)
Got signaling l2cap packet...
Handle_L2CAP_Connect_Request.
Handle_L2CAP_Connect_Request :: new local_cid = 65
L2CAP : Sending connect response
Sending l2cap connect response...
L2CAP send Config Request...
Deliver_HCI_ACL_Data_Packet (len=12)
Got signaling l2cap packet...
L2CAP handle Config Request (local_cid = 65)
canceling timer...
Handle_L2CAP_Config_Request : no options
sending l2cap config response...
Deliver_HCI_ACL_Data_Packet (len=18)
Got signaling l2cap packet...
L2CAP handle config response
L2CAP connected.
Selected MTU : 672
sdp : L2CAP connection success
Deliver_HCI_ACL_Data_Packet (len=17)
Handle_SDP_Service_Search_Req(Transac:1, len:8, cid:65)
INFO : Max Response:65535, CS=0
GetSvcHandleList : SearchPattern:
35 03 19 11 1b
Service Not Found.
Sending SDP ServiceSearch Response
Handle_SDP_Service_Search_Req : sending 10 bytes
L2CAP_Send_Data_Header()
Sending SDP ServiceSearch Response : Done
Deliver_HCI_ACL_Data_Packet (len=12)
Got signaling l2cap packet...
Handle_L2CAP_Disconnect_Request(): got disconnect request
INFO : disconnecting l2cap channel with local_cid: 65, psm: 1.
L2CAP : Freeing channel 0x0041
sdp : L2CAP disconnection success